Precision Dual-Frequency System for Deep Dermal Remodeling
Product Description
|
Product Model |
TM80 |
|
|
Category |
Specification |
Value |
|
General Specifications |
Power Supply |
AC 100~240V, 50/60Hz (Wide Voltage) |
|
Input Power |
300VA |
|
|
Needle Pitch |
1.5 – 2.5mm |
|
|
Needle Diameter |
0.2mm |
|
|
Penetration Depth |
0.2 – 7.0mm (Adjustable) |
|
|
Needle Type |
Insulated / Non-Insulated |
|
|
Energy Delivery Mode |
Single-Depth / Multi-Depth Delivery |
|
|
Cartridge Lifespan |
1,200 Shots |
|
|
Cartridge Detection |
Auto-Recognition |
|
|
Radio Frequency (RF) |
Operating Frequency |
700KHz ±20% / 2.2MHz ±20% |
|
No-Load Voltage |
415Vpp / 110Vrms ±10% |
|
|
Max RF Output Power |
45W |
|
|
Control Mode |
Constant Power |
|
|
Vacuum Suction |
Smart Detection |
Detects skin contact via real-time air pressure changes |
|
Max Vacuum Pressure |
29mmHg |
|
|
Max Airflow Rate |
3.6 L/min |
|
|
Noise Level |
< 60dB |
|
|
Needle Insertion Mechanism |
Max Stroke Length |
7.0mm |
|
Max Insertion Force |
1.5kg |
|
Next-Generation Dermal Restructuring & Skin Refinement
The TM80 represents a leap forward in fractional radiofrequency technology. By integrating Intelligent Dual-Frequency (2.2MHz & 700KHz) with precision vacuum-assisted delivery, this system provides a non-surgical solution for deep tissue remodeling, scar revision, and comprehensive skin tightening.
Strategic Dual-Frequency Modulation (2.2MHz & 700KHz)
The TM80 is not a single-output device; it is a precision instrument designed to treat the full thickness of the skin. By modulating between two distinct radiofrequencies, practitioners can execute localized thermal therapy with anatomical accuracy:
700 KHz (Deep Structural Repair): Lower frequencies offer higher impedance and deeper penetration. This mode is specifically calibrated for reticular dermis reconstruction, targeting deep-seated acne scarring and severe skin laxity by stimulating Type I and Type III collagen synthesis.
2.2 MHz (Superficial Refinement): Higher frequency energy concentrates in the upper dermal layers. This is optimal for pore miniaturization, fine line reduction, and improving overall skin luminosity without excessive thermal spread to deeper tissues.
Intelligent Vacuum-Coupled Delivery System
Traditional microneedling often suffers from “floating” tips, leading to uneven energy distribution and patient discomfort. The TM80 solves this through a High-Precision Vacuum Sensing System (29mmHg):
Tissue Engagement: The vacuum pulls the skin taut against the needle head, ensuring the needles penetrate at a perfect 90-degree angle.
Safety Interlock: The RF pulse is electronically locked until a stable vacuum seal is detected. This prevents “air-firing” and ensures that 100% of the energy is delivered into the target tissue, not dissipated on the surface.
Pain Management: By stabilizing the skin before insertion, the mechanical trauma is localized, significantly reducing the “pulling” sensation and post-operative downtime.
MN-Burst Mode: 5-Layer Volumetric Heating
The TM80 introduces the MN-Burst algorithm, a sophisticated delivery mode designed for maximum clinical efficiency. Unlike standard single-pulse systems, MN-Burst allows for Multi-Depth Energy Release within a single needle insertion.
Dynamic Range: Energy can be cascaded across five distinct depths (from 0.2mm to 4.5mm).
Clinical Outcome: This creates a continuous “thermal column” within the dermis, reconstructing the skin’s structural scaffold from the bottom up in a single pass.
Unmatched Clinical Results with Minimal Downtime
Multi-Dimensional Repair: Targets 5 skin layers (Superficial repair, Tightening, Dermal reconstruction, and Deep remodeling).
Safety First: RFID chip encryption ensures only original, sterilized tips are used, protecting your device’s longevity and patient health.
Treatment Versatility: One machine for Acne Scars, Stretch Marks, Skin Laxity, and Hyperhidrosis.
Transforming Skin Across All Dimensions
Face: Lifting sagging skin, refining pores, and erasing wrinkles (0.2mm – 3.5mm depth).
Body: Treating stretch marks, cellulite, and skin laxity on the abdomen, arms, and thighs (up to 7.0mm depth).
Advanced Recovery: Faster healing times due to precise vacuum-assisted penetration and electrocoagulation.
Medical-Grade Reliability & ROI
Engineered with RFID chip encryption to ensure only genuine, EO-sterilized tips are used. With a 1,200-shot lifespan per tip and adjustable depth (0.2–7.0mm), the TM80 maximizes clinical efficacy and business profitability.
Global Manufacturing & Distribution Support
As the original source factory for the TM80, BeauteMed provides a vertically integrated supply chain for our global partners:
Regulatory Compliance: Fully certified with FDA, Medical CE, and ISO 13485.
Logistics Efficiency: Rapid deployment from our Los Angeles (USA) warehouse or Beijing headquarters, with typical delivery within 3–12 days.
OEM/ODM Capabilities: Custom interface branding and hardware modifications available for large-scale distributors.
Datasheet
| Item | Gold RF Microneedle Device with Vacuum Sensing System |
| Manufacture | BeauteMed |
| Certificate | FDA, Medical CE and ISO13485 |
| Delivery time | 3-12 Days |
| OEM | Accept |
| Treatment type | Systematic skin solutions |

